Koch Chemie - Headlight Polish Set - Headlight Restoration Kit

Product description

Koch Chemie - Headlight Polish Set - Headlight Restoration Kit

Koch Chemie - Headlight Polish Set is a headlight restoration kit that restores clarity to yellowed, dull headlights.

With perfectly matched polishes and pads, an optimal surface is achieved in just two steps.

The practical black plastic case contains sanding papers of different grits, a hand block with Velcro for manual sanding, the polishes Headlight Polish 1 and Headlight Polish 2 with sealing component, as well as three matching pads.

The included Thermo Pad allows good control over the material's temperature during processing, as the pad's color change due to its thermochromic property serves as an indicator.

In total, the Headlight Polish Set can be used to restore 50 headlights.

Contents of the set:

  • 406250 250 ml Headlight Polish 1
  • 407250 250 ml Headlight Polish 2
  • 999577 Heavy Cut Pad 76 x 23 mm
  • 999274 Lambswool Pad 80 mm
  • 999602 Thermo Pad 76 x 23 mm
  • 999603 Abralon Sandpaper 1,000 grit
  • 999250 Abralon Sandpaper 2,000 grit
  • 999251 Abralon Sandpaper 4,000 grit
  • 999604 Hand block with Velcro for sandpaper

Areas of application:

PMMA headlights on cars, commercial vehicles, motorcycles, boats, etc.

Recommended application:

  1. Before starting, clean the headlight and then mask off the edges near the hood, fender, grille, and bumper.
  2. Depending on weathering, sand the headlight surface using the hand block or an orbital polisher with the sandpaper. For heavily yellowed headlights, start with the 1,000 grit sandpaper (coarse grit). Then repeat this step with the 2,000 grit (medium grit) and 4,000 grit (fine grit) sandpapers until a uniformly sanded surface is achieved. If the headlights are only slightly dull, sanding can be skipped.
  3. Remove the sanding marks with Headlight Polish 1 and the Heavy Cut Pad or the Lambswool Pad. We recommend using a rotary polisher and applying the cutting polish at medium speed and medium pressure in a cross pattern.
  4. Polish the surface to a high gloss with Headlight Polish 2 and the Thermo Pad. We recommend using a rotary polisher and applying the finishing polish at medium speed and medium pressure in a cross pattern. Please observe the legal regulations regarding headlight processing in your country before use.

Product Information

Shipping & Returns