Nasiol - TrimCoat - Plastic Sealant 30ml

Product description

Nasiol - TrimCoat - Plastic Sealant 30ml


Application Video: Nasiol - TrimCoat



Nasiol TrimCoat is a highly effective plastic sealant for restoring and protecting plastic parts on your car.

This plastic sealant prevents discoloration caused by UV rays, chemical influences, or dirt, restoring the plastic to its rich, original color.
With its water- and oil-repellent properties, the surface stays cleaner and protected for longer.

Why use Nasiol TrimCoat?

  • Restores the original look of plastic surfaces
  • Provides protection against UV rays and color changes
  • Water- and oil-repellent: protects against dirt and moisture
  • Satin finish with a subtle shine
  • Lasts up to 2 years

Areas of application

  • Exterior and interior plastic trims
  • Bumpers, door handles, mirror housings
  • Rubber seals and vinyl parts

Instructions for use

  1. Ensure the surface to be treated is clean, dry, and cool.
  2. Gently shake the bottle before use.
  3. Apply the product to the surface with the applicator (approx. 5-8 ml per m²).
  4. Spread evenly in crosswise motions.
  5. Wait 48 hours for the product to fully cure.

Scope of delivery

  • 1x Nasiol TrimCoat 30ml
  • 1x applicator cloth
  • 1x nitrile gloves
  • 1x Nasiol sticker
  • 1x pipette

Technical data

  • Consumption: 5-8 ml per m²
  • Durability: up to 2 years
  • Layer thickness: 700-1000 nm
  • pH value: 7
  • Water repellency: Yes
  • UV protection: Yes

FAQs

1. What is Nasiol TrimCoat and what does it do?

  • Nasiol TrimCoat is a plastic impregnation that restores and protects plastic surfaces. It gives a fresh, satin look and protects against UV rays, dirt, and discoloration.

2. How long does the sealant last?

  • The sealant protects for up to 2 years, depending on environmental conditions.

3. Can TrimCoat be used on new and old vehicles?

  • Yes, it is suitable for all plastic parts regardless of the vehicle's age.

4. How is the product applied correctly?

  • Make sure the surface is clean and dry, apply the product evenly, and allow it to cure for 48 hours.

5. How much product do I need per application?

  • 5-8 ml per m² is sufficient, about 200-250 drops.

6. What happens if I apply the product incorrectly?

  • Incorrectly applied TrimCoat can only be removed by sanding or polishing.

Product Information

Shipping & Returns