Dr. Wack - A1 Iron Fallout Remover Gel 500ml

Removes iron fallout quickly and thoroughly – gentle on materials

The Dr. Wack A1 Iron Fallout Remover Gel reliably and gently removes iron fallout, early corrosion marks, and industrial dust. The acid-free formula does not attack surfaces. Thanks to the gel formula, the product adheres perfectly and does not drip.

Product Benefits

• EXTRA strong effect – works independently and quickly
• Effectively dissolves iron fallout, corrosion marks, and industrial dust
• Acid-free – gentle on materials
• Suitable for paint, plastic, and metal
• Gel formula – does not drip, works precisely
• Effect indicator shows when to rinse off

The Problem

Iron fallout is caused by hot brake dust that burns into surfaces like paint, chrome, and metal. Combined with road salt and moisture, rust forms that reduces the vehicle's value and appearance and can lead to progressive corrosion damage.

Areas of Application

• Suitable for paint, plastic, and metal
• Note: Test compatibility on bare aluminum beforehand

Application

1. Spray product onto a previously cleaned surface
2. Let it work for about 5 minutes
3. Wipe off with a wet sponge
4. Then rinse thoroughly with water and dry
5. Important: Do not apply in direct sunlight or on hot paint

Tip

After cleaning, a permanent seal with A1 HIGH END Spray Wax or A1 Speed Wax Plus 3 is recommended for optimal care and protection.

FAQs

1. Can I use the iron fallout remover on plastic?

• Yes, the gel is suitable for plastic, paint, and metal – please check compatibility on aluminum.

2. What exactly does the effect indicator show?

• The effect indicator changes color as soon as the dwell time is complete and rinsing can begin.

3. Is the product acid-free?

• Yes, the formulation is completely acid-free and therefore especially gentle on materials.

4. Can I use the cleaner in sunshine?

• No, avoid direct sunlight and hot surfaces during application.

5. What happens if I leave the cleaner on too long?

• Do not exceed the dwell time unnecessarily – rinse off promptly as soon as the effect indicator reacts.

6. How do I protect the cleaned surfaces after use?

• A subsequent sealing with A1 HIGH END Spray Wax or A1 Speed Wax Plus 3 is recommended.