Nasiol - LeatherBoost - Nano leather sealant 150ml

Nasiol - LeatherBoost - Nano leather sealant 150ml

Nasiol - LeatherBoost 150ml is a nano leather sealant for real and artificial leather to prevent color transfer and keep wear and tear as minimal as possible.

By adding water and oil repellency to the surface, this leather care product protects the surface from dirt and stains and protects against color fading caused by the sun and leather deformation that can occur over time. Nasiol LeatherBoost helps you extend the life of your leather and protects the surface from chemicals and UV rays.

Where can I use this leather protector?

• LeatherBoost offers ultimate automotive leather protection. The product can be used on most genuine and synthetic leather surfaces of vehicles such as cars, yachts, boats and trains.
• LeatherBoost is the perfect leather furniture, couch and sofa protection, regardless of whether the surface is real or artificial leather.
• LeatherBoost will become a pillar of leather shoe care for you.

Application tips for Nasiol LeatherBoost Coating to protect leather

• The surface must be absolutely free of dirt, dust and dry.
• The application should take place in a well-ventilated area.
• The product should be applied to the surface using an applicator block and a suede cloth.
• Allow the surface to dry for 24 hours to ensure effectiveness.

Characteristics:

• Ensures UV and chemical resistance for paint protection films.
• Applicable to all types of films (matt, glossy and transparent).
• Offers a service life of up to 18 months.
• Super finish with high hydrophobicity.
• The self-healing effect of the PPF film is not affected.
• Recommended for professional detailers.

Areas of application or surfaces:

• Natural leather
• Artificial leather
• PU leather
• PVC leather surfaces of car seats
• Household appliances
• Laptop bags and smartphone cases
• Furniture
• Do not apply to plastic parts, painted surfaces, glass surfaces, textiles/fabrics.

APPLICATION:

Even the best leather protectors and care products require cleaning the application surface from stains such as oil, dirt, dust, water. Shake the product bottle gently before use. Pour the product from the standard bottle of Nasiol LeatherBoost onto the applicator block and suede cloth. Then spread evenly over the surface in a criss-cross pattern, making sure there are no dry spots. Allow the surface to dry for 24 hours for full effectiveness. If residue remains on the surface after drying, rub the product into the surface with a dry cloth. In case of accidental application on surfaces other than those indicated, the surface should be wiped immediately with a clean and lint-free microfiber cloth.

1. For best results, ensure that the environment in which the application takes place is as close as possible to the recommended temperature and humidity levels (23 °C and 50% relative humidity).
2. Apply in a shaded area
3. Only apply to surfaces that are not too cold or too warm
4. Prepare the surface by applying a suitable leather cleaner to remove any remaining contaminants and dry with a clean, lint-free microfiber cloth before using the product. Outline the application area either with masking tape or visually.
5. The consumption rate is 35-45 ml/m2 for genuine leather and 30-40 ml/m2 for artificial leather. Do not use excessively.
6. Shake the product bottle gently before use. Pour the product from the standard bottle of Nasiol LeatherBoost onto the applicator cloth placed on the applicator block and spread it homogeneously on the surface with horizontal and vertical movements, making sure there are no dry spots.
7. Allow the surface to dry for 24 hours to ensure full effectiveness. Keep the coated surface away from direct sunlight, excessive dust, water and other contaminants during the curing period.
8. In case of accidental application on surfaces other than those indicated, the surface should be wiped immediately with a clean and lint-free microfiber cloth.

Unchanged service life:

• Up to 1 year

Temperature resistance:

• 150°C

Chemical resistance:

• pH 1-11

Consumption:

• Genuine leather: 35-45 ml/m²
• Artificial leather: 30-40 ml/m²

Layer thickness:

• ~ 75-100nm

Shelf life:

• 1 year if the bottle is unopened
• 2 months after opening the bottle

Store at:

• -3°C to +30°C

Curing time

• 24 hours

Scope of delivery:

• Nasiol - LeatherBoost 150ml
• Applicator block
• Suede towels 5 pcs.