ADBL - Clay Mitt

ADBL - Clay Mitt

ADBL - Clay Mitt is a clay mitt with a polymer layer and is an alternative to traditional cleaning clay.

Clay Mitt easily removes tar, resin, asphalt, insect remains and other stubborn residues.

The big advantage of this kneading glove compared to conventional cleaning clay is that it is easy and time-saving to use.

ADBL Clay Mitt is much more efficient than traditional cleaning clays.

APPLICATION:

1. Wash vehicle thoroughly, rinse BUT DO NOT LET IT DRY
2. Spray the surface to be treated generously with ADBL Clay Glide or another Clay Lube
3. Glide the Clay Mitt across the surface in horizontal and vertical movements without applying excessive pressure
4. Rinse the kneading glove regularly with water to avoid unwanted scratches
5. Work on component by component until the entire car or the desired surface is smooth and free of contaminants
6. Wash and dry the car again
7. Rinse the ADBL Clay Mitt thoroughly with water, allow to dry and store in the original packaging

NOTES:

• If the vehicle is to undergo a complex decontamination treatment for the first time, the vehicle should be cleaned with a tar and resin remover (e.g. ADBL Tar and Glue Remover) and a rust remover (e.g. ADBL Vampire or Vampire Liquid) before using the kneading glove in order to remove as much of the contaminants as possible and to soak any remaining ones.
• NEVER use ADBL Clay Mitt in combination with products containing solvents (e.g. tar removal products) as this may damage the clay mitt.
• Do not expose the kneading glove to temperatures above 40 degrees.