ADBL - Clay Sponge - kneading sponge

ADBL - Clay Sponge - kneading sponge

ADBL - Clay Sponge is a kneading sponge with which tar, resin, asphalt, insect remains and other stubborn dirt can be easily removed.

The clear advantages are, on the one hand, the ease of handling and the speed of work.

The lifespan of ADBL Clay Sponge is much longer than that of traditional cleaning clay.

APPLICATION:

1. Wash vehicle thoroughly, rinse BUT DO NOT LET IT DRY
2. Spray the surface to be treated generously with ADBL Clay Glide or another Clay Lube
3. Glide the Clay Sponge over the surface in horizontal and vertical movements without applying excessive pressure
4. Rinse the kneading sponge regularly with water to avoid unwanted scratches
5. Work on component by component until the entire car or the desired surface is smooth and free of contaminants
6. Wash and dry the car again
7. Rinse the ADBL Clay Mitt thoroughly with water, allow to dry and store in the original packaging

NOTES:

• If the vehicle is to undergo a complex decontamination treatment for the first time, the vehicle should be cleaned with a tar and resin remover (eg ADBL Tar and Glue Remover) and a rust remover (eg ADBL Vampire or Vampire Liquid) before using the kneading sponge in order to remove as much of the contaminants as possible and to soak any remaining ones.
• NEVER use ADBL Clay Sponge in combination with products containing solvents (e.g. tar removal products) as this may damage the clay glove.
• Do not expose the kneading sponge to temperatures above 40 degrees.