Liquid Elements - BASE COAT 9H - Ceramic Coating 50ml

Liquid Elements - BASE COAT 9H - Ceramic Coating 50ml

The well-known base coat from Liquid Elements is finally back.

This product is a ceramic coating with the main function of forming an extremely hard surface (9H) that is applied over the vehicle parts.

Due to the extremely complex and high-quality formulation, which only uses 98% active ingredients, an extremely hard layer is applied to the exterior of the vehicle, which offers very long-lasting protection.

This product is highly recommended in combination with the Liquid Elements Eco Shield.

In this combination, the applied Base Coat 9H provides a hard, shiny surface with which the Eco Shield can form a perfect bond.

In the second step, the Eco Shield creates a highly hydrophobic, smooth and even shinier surface.

So you get extreme protection against scratches and other defects, an enormous shine, as well as a highly water-repellent, smooth and hydrophobic surface.

With the combination of Eco Shield and Base Coat 9H, dirt and grime have little chance of sticking to the vehicle paint and can be removed very easily.

Washing your car has never been so easy, quick and paint-protecting at the same time.

Liquid Elements Base Coat 9H Highlights :

• Extremely easy to process
• Hard protective layer
• Long-term protection for the entire outdoor area
• Very easy to clean surface
• Perfect substrate for Liquid Elements Eco Shield
• In conjunction with Eco Shield the perfect combination for vehicle protection
• Increases service life of Eco Shield
• Up to 2 years shelf life
• Compatible with all materials in the vehicle exterior
• Also ideal for all types of rims
• Resistant to cleaners with PH values ​​between 4 - 11
• Can also be used stand alone (protective function)
• Hardness: 9H

Liquid Elements Base Coat 9H Application :

• Before application, the paint should be washed, kneaded and prepared to the best possible condition.
• Of course, each user can define for themselves the best possible state and what they are satisfied with.
• After polishing, the paint should be degreased again with IPA. Then the application can begin.

----------

• Put 5-6 drops on an applicator and spread thinly over an area of ​​approx. 60x60cm
• After min. 30 sec to max. 5 min, remove residues with an Eraser microfiber cloth
• If necessary, repeat the process after 30 minutes at the earliest (maximum two layers possible)
• Allow to cure for at least 60 minutes without stress before applying Liquid Elements Eco Shield.

Liquid Elements Base Coat 9H Notes :

• Do not use on hot surfaces
• Remove all residues carefully and completely
• Store in a cool, dry place
• Protect from frost