Nasiol - NeoCoatX - User-friendly ceramic coating 100ml

Nasiol - NeoCoatX - User-friendly ceramic coating 100ml

Nasiol - NeoCoatX is an easy-to-apply nano-ceramic coating that combines the ultimate NASIOL technology with user-friendly traditional coating methods.

Naisol NeoCoatX applied to your car provides a protective layer against

• UV rays,
• strong chemicals,
• Bird droppings and
• road salt.

It delivers long-lasting, highly hydrophobic properties, along with deep shine that brings the paint color to life.

Characteristics:

• 
  
• Easy application due to flexible flash-off time.
• High resistance to chemicals.
• 6-12 months of non-decreasing shelf life.
• Recommended for detailing enthusiasts.
• Up to 5 cars can be coated.

Areas of application or surfaces:

• Nasiol NeoCoatX can be used on vehicle paint, headlights, taillights, rims and chrome parts.
• Do not apply to unpainted plastic parts, fresh paintwork (up to 3 months), inferior paintwork, glass, textiles and tires.

APPLICATION:

1. Avoid direct sunlight during application and only work on cool surfaces.
2. Wash your vehicle thoroughly.
3. Prepare the surface with a paint cleaner (e.g. Nasiol Clean) to improve the adhesion of the nano coating.
4. Do not work on areas larger than 1 m² per session.
5. Place a suede cloth on the sponge surface of the applicator block. (Change the suede cloth every 3-4 passes.)
6. Shake the product gently before use.
7. Open the lid and pour the required amount of product onto the suede cloth. (2-3 ml is enough for 1 m² area.)
8. Don't forget to keep the lid closed during use.
9. Gently spread the product over the surface in criss-cross movements.
10. Once beading occurs (under normal conditions it takes 2-3 minutes), gently wipe the excess product from the surface using a microfiber cloth in linear motions. (To get the most out of microfiber cloths, fold each one four times before applying and do not reuse the side of the cloth you used.)
11. After wiping the surface with the microfiber cloth, complete the final polishing process by gently using the microfiber cloth (preferably a second new microfiber cloth) in circular motions.
12. If desired, a second coat can be applied after waiting 1 hour.

Curing time

• 24 hours Pre (the vehicle can be driven after 24 hours)
• 48 hours complete

Scope of delivery:

• Nasiol - NeoCoatX 100ml