ADBL - Clay Mitt - Kneading Glove

ADBL - Clay Mitt is a kneading glove with a polymer layer and serves as an alternative to traditional detailing clay.

Clay Mitt easily removes tar, resin, asphalt, insect residues, and other stubborn contaminants.

The major advantage of this kneading glove over conventional detailing clay is its effortless and time-saving application.

ADBL Clay Mitt is much more efficient than traditional detailing clays.

APPLICATION: 

1. Thoroughly wash the vehicle, rinse BUT DO NOT DRY
2. Generously spray the area to be treated with ADBL Clay Glide or another clay lubricant
3. Glide the Clay Mitt over the surface in horizontal and vertical motions without applying excessive pressure
4. Rinse the kneading glove regularly with water to avoid unwanted scratches
5. Work section by section until the entire car or desired surface is smooth and free of contaminants
6. Wash and dry the car again
7. Rinse the ADBL Clay Mitt thoroughly with water, let it dry, and store it in the original packaging

NOTES:

• If the vehicle is undergoing a complex decontamination treatment for the first time, clean it beforehand with a tar & resin remover (e.g., ADBL Tar and Glue Remover) and a fallout remover (e.g., ADBL Vampire or Vampire Liquid) to eliminate as many contaminants as possible and to soften the remaining ones.
• NEVER use ADBL Clay Mitt in combination with solvent-containing products (e.g., tar removers), as this can damage the kneading glove.
• Do not expose the kneading glove to temperatures above 40 degrees.