Easy to use

Q2M WaterSpot is very easy to use. Clean your car with a high-quality, pH-neutral, and soft shampoo, then dry the surface. Next, spray directly onto the affected area and wipe it off with a microfiber cloth. For heavy water spots, spray directly and wipe the surface several times. Repeat the step if necessary.

Efficient

Q2M WaterSpot is thick and oily, so a small amount covers a large area. It does not evaporate quickly or dry out, allowing the cleaned surface to be treated multiple times.

Bodywork and sealant protection

The biggest advantage of Q2M WaterSpot is its safety on paint. Improper care can cause water spots on fresh sealants. You can remove most unsightly defects without polishing or reapplying the sealant using Q2M WaterSpot. Note that Q2M WaterSpot can affect the hydrophobic layer. It is dangerous to leave the product on paint or especially glass for an extended time.

APPLICATION INSTRUCTIONS

• Wash the entire bodywork with a high-quality shampoo, rinse well, and dry it.
• Spray onto the intended surface and wipe off shortly after spraying.

SAFETY INSTRUCTIONS

• Store in a dry and cool place. Keep out of reach of children.
• Do not apply under direct sunlight.