Koch Chemie - Headlight Polish Set - Headlight preparation set

Koch Chemie - Headlight Polish Set - Headlight Preparation Set

Koch Chemie - Headlight Polish Set is a headlight preparation set that restores the look of yellowed, dull headlights

With the perfectly coordinated polishes and pads, an optimal surface is created in just two steps.

The practical black plastic case contains sandpaper of different grits, a hand block with Velcro for manual sanding, the polishes Headlight Polish 1 and Headlight Polish 2 with sealing component, and three matching pads.

The included Thermo Pad allows for good control over the temperature development of the material during processing, as the color change of the pad serves as an indicator due to its thermochromic property.

A total of 50 headlights can be processed with the Headlight Polish Set.

Components of the set:

• 406250 250 ml Headlight Polish 1
• 407250 250 ml Headlight Polish 2
• 999577 Heavy Cut Pad 76 x 23 mm
• 999274 Lambskin Pad 80 mm
• 999602 Thermo Pad 76 x 23 mm
• 999603 Abralon sandpaper 1,000 grit
• 999250 Abralon sandpaper 2,000 grit
• 999251 Abralon sandpaper 4,000 grit
• 999604 Hand block with velcro for sandpaper

Applications:

PMMA headlights on cars, commercial vehicles, motorcycles, boats, etc.

Application recommendation:

1. Before starting, clean the headlight and then mask off the edge areas to the hood, fenders, grille and bumper.
2. Depending on the weathering of the headlight surface by means of a hand block or eccentric polishing machine.machine with the sandpaper. If the headlights are very yellowed, use 1,000 grit sandpaper (coarse grit) first. Then repeat this step with the 2,000 (medium grit) and 4,000 (low grit) sandpaper until an evenly sanded surface is achieved. If the headlights are only slightly dull, the sanding can also be skipped.
3. Remove the sanding with the Headlight Polish 1 and the Heavy Cut Pad or the Lambskin Pad. We recommend to use a rotary polisher and to process the sanding polish at medium speed and medium pressure in a crosswise motion.
4. Polish the surface to a high gloss using Headlight Polish 2 and the Thermo Pad. We recommend to use a rotary polisher and to process the high gloss polish at medium speed and medium pressure in a crosswise motion. Before use, please observe the legal framework conditions for the application of the polish.beitung of headlights in your country.